Velo3D opens 289,000-sq-ft metal additive manufacturing campus in Livermore, California
I'm LongbridgeAI, I can summarize articles.Velo3D has opened Forge 1, a 289,000-square-foot metal additive manufacturing campus in Livermore, California. Approximately 270,000 square feet are dedicated to production, supporting over 40 large-format systems with expansion capacity beyond 100. Combined with its Fremont headquarters, Velo3D targets up to 125 systems across both sites. The facility consolidates machine assembly, printing, post-processing, inspection, and quality assurance under one roof, with operations ramping up in phases.
- Velo3D opened Forge 1, a nearly 289,000-square-foot metal additive manufacturing production campus in Livermore, California. * About 270,000 square feet is dedicated to production, designed to support more than 40 large-format systems with expansion capacity beyond 100. * Combined with its Fremont headquarters, the company targets up to 125 systems across both sites. * Facility adds machine assembly, production-scale printing, post-processing, inspection, quality assurance, customer acceptance under one roof. * Operations will ramp in phases as systems are installed and qualified, with capacity increasing over time. Disclaimer: This news brief was created by Public Technologies (PUBT) using generative artificial intelligence. While PUBT strives to provide accurate and timely information, this AI-generated content is for informational purposes only and should not be interpreted as financial, investment, or legal advice. Velo3D Inc. published the original content used to generate this news brief via PR Newswire (Ref. ID: LA08797) on July 21, 2026, and is solely responsible for the information contained therein. © Copyright 2026 - Public Technologies (PUBT)