Commodity Chemicals

Henghe Mould

Henghe Mould released FY2026 Q1 earnings on April 28 After-Market (BJT), actual revenue CNY 200.03 M, actual EPS CNY 0.03

Henghe Mould to Release FY2026 Q1 Earnings on April 29 After-Market (BJT)

Henghe Mould released FY2025 Q4 earnings on April 8 After-Market (BJT), actual revenue CNY 260.16 M, actual EPS CNY 0.0512

Henghe Mould released FY2025 Annual Earnings on April 8 After-Market BJT, actual revenue CNY 964.19 M, actual EPS CNY 0.22

Henghe Mould to Release FY2025 Earnings on April 9, 2026, After-Market BJT

Henghe Mould released FY2025 9 months earnings on October 28 During-Market (BJT), actual revenue CNY 704.03 M, actual EPS CNY 0.1694

Henghe Mould released FY2025 Q3 earnings on October 28 During-Market BJT, actual revenue CNY 247.9 M, actual EPS CNY 0.0495

Henghe Mould FY2025 Q3 Earnings Release on October 29 During-Market BJT

Henghe Mould released FY2025 Semi-Annual Earnings on August 28 After-Market (BJT), actual revenue CNY 456.13 M, actual EPS CNY 0.12

Henghe Mould released FY2025 Q2 earnings on August 28 After-Market (BJT), actual revenue CNY 253.05 M, actual EPS CNY 0.0698

Henghe Mould to Release FY2025 Semi-Annual Earnings on August 29, 2025 (BJT)

Henghe Mould released FY2025 Q1 earnings on April 28 After-Market BJT, actual revenue CNY 203.08 M, actual EPS CNY 0.05

Henghe Mould to Release FY2025 Q1 Earnings on April 29 After-Market BJT

Henghe Mould released FY2024 earnings on April 21 After-Market (BJT), actual revenue CNY 751 M, actual EPS CNY 0.17

Henghe Mould released FY2024 Q4 earnings on April 21 After-Market (BJT), actual revenue CNY 202.84 M, actual EPS CNY 0.059

Henghe Mould FY2024 Annual Earnings Release Scheduled for April 22, 2025, After-Market BJT

Yokogawa Precision Approved by CSRC for Specific Stock Issuance

Yokogawa Precision approved by Shenzhen Stock Exchange for stock issuance to specific objects on January 22, 2025

Yokogawa Precision Clarifies No Involvement in Humanoid Robot Business

Henghe Precision releases Q3 2024 report

300539

Henghe Mould announced that the revenue for the third quarter was 248 million yuan, a year-on-year increase of 19.09%; the net profit was 10.4834 million yuan, a year-on-year increase of 14.46%. The revenue for the first three quarters was 704 million yuan, a year-on-year increase of 28.43%; the net profit was 37.4995 million yuan, a year-on-year increase of 54.65%

Zhitong

Henghe Mould: Third quarter net profit of 10.4834 million yuan, a year-on-year increase of 14.46%

Henghe Mould announced that director and CFO Huang Feihu, along with director Lu Zhengmiao, plan to collectively reduce their holdings by no more than 0.026% of the company's shares

Henghe Mould: Shareholders plan to reduce their holdings by no more than 0.026% of the company's shares

Henghe Mould plans to establish a joint venture company SHARP-TEX PTE.LTD. in Singapore with MICRO-TEX PTE.LTD. to optimize business layout and enhance market competitiveness. In the joint venture, Yokogawa International Holdings Co., Ltd. holds 40%, and MT holds 60%. The total investment amounts to USD 23 million, with MT investing USD 13.8 million and Yokogawa International investing USD 9.2 million

Henghe Mould plans to establish a joint venture company in Singapore to strategically layout a precision manufacturing base locally

688028

002249

002276

Robot concept stocks have seen an expanded increase, with Henghe Mould hitting the daily limit of a 20cm rise, and Wanma Co., Ltd, BROAD-OCEAN MOTOR, RiYing Electronics, FuLongMa, and more than ten other stocks also hitting the daily limit. LiHeXing, Worldia, and FuLiWang followed suit

Worldia

BROAD-OCEAN MOTOR

Wanma Co., Ltd

The rise of robotics concept stocks further expands, with more than ten individual stocks hitting the daily limit

002768

300115

301196

600143

PEEK material concept stocks weakened, KINGFA touched the limit down, GON fell over 8%, EWPT, Henghe Mould, and VOKE had the largest declines

EWPT

VOKE

KINGFA

PEEK material concept stocks weakened, KINGFA hit the limit down

002709

301076

301005

A-share PEEK material concept stocks continue to rise, TINCI hits the daily limit, Henghe Mould previously locked the board, SINO—HIGH, and ESSENCE FASTENING SYSTEMS (SHANGHAI) have the highest gains

TINCI

SINO—HIGH

ESSENCE FASTENING SYSTEMS (SHANGHAI)

600176

The A-share PEEK material concept is rising, Henghe Mould is up over 18%, TINCI is up over 7%, and CJS, SINO—HIGH, and KedaLi are also following suit

Henghe Mould released its semi-annual report for 2025, with operating revenue of 456 million yuan, a year-on-year increase of 34.15%. The net profit attributable to the parent company was 27.0161 million yuan, a year-on-year increase of 79.04%; the net profit after deducting non-recurring gains and losses was 23.1726 million yuan, a year-on-year increase of 86.70%. The basic earnings per share were 0.12 yuan

Henghe Mould released its performance for the first half of the year, with a net profit attributable to the parent company of 27.0161 million yuan, an increase of 79.04%

According to the Tianyancha App, recently, Chaohu Haidexin Intelligent Automotive Technology Co., Ltd. was established, with Liu Gang as the legal representative and a registered capital of 10 million RMB. The business scope includes the manufacturing of automotive parts and components, electronic components, mold manufacturing, and more. Shareholder information shows that the company is jointly held by Henghe Mould and Chaohu Urban Construction Investment Co., Ltd

Henghe Mould and others established an intelligent automotive technology company in Chaohu with a registered capital of 10 million

Henghe Mould announced that due to the cumulative deviation of the stock trading price exceeding 100% for seven consecutive trading days from July 21 to July 29, 2025, it constitutes a serious abnormal fluctuation. The company pointed out that although there is high market attention on the humanoid robot concept, its reducer products are mainly applied in smart home appliances and automotive parts, and do not involve humanoid robot business

Henghe Mould: The company's reducer products do not involve humanoid robot business

Henghe Mould(300539.SZ)