D

Applied Materials (Trans): 2027 WFE +30%; doubling capacity to gear up

Below is Dolphin Research's compiled Trans of the $Applied Materials(AMAT.US) FY26 Q4 earnings call. It summarizes the key takeaways and guidance.

I. Quick recap of the print

1. Capital returns: In FQ4, buybacks were $2.0bn and dividends were $421mn, totaling over $2.4bn, with buybacks the largest single-quarter in 8+ years. For FY26, total returns exceeded $4.7bn (nearly $3.2bn repurchases, $1.6bn dividends).

a. Run-rate going forward: $10.8bn remains under the repurchase authorization. Over the long term, the company plans to return 80%–100% of FCF to shareholders.

2. FQ1 guide: FQ1 is a 14-week quarter, a tailwind for AGS revenue. This extends the service and spares billing window.

a. Revenue and EPS: Revenue of $11.1bn ± $0.5bn, implying +58% YoY at the midpoint. Non-GAAP EPS of $4.35 ± $0.20, up 83% YoY.

b. By segment: Semi Systems about $8.7bn (+69% YoY), AGS about $2.0bn (+28% YoY), and Other about $400mn. Mix remains AI-led.

c. Margins and opex: Non-GAAP GPM about 50.8% (+170bps YoY). Non-GAAP opex about $1.7bn, with a non-GAAP tax rate of ~13%.

d. FQ2 modeling: Assume AGS revenue stays around FQ1 levels. Model opex at ~15% of revenue.

3. Margin trends and drivers

a. Gross margin: FQ4 non-GAAP GPM of 50.6% (+250bps YoY), marking 14 straight quarters of YoY expansion, driven by favorable mix and pricing. FY26 full-year GPM was 50.1% (+130bps).

b. Operating leverage: FQ4 non-GAAP OPM hit a record 35.3% (+670bps YoY). Opex was 15.2% of revenue, down 430bps YoY.

c. Path forward: Lift GPM by launching higher-value products and sharing in that value. Enhance operating leverage by scaling support functions with AI and automation while adding limited headcount.

4. Cash flow and capex

a. FY26: Operating cash flow was $8.9bn (+11%), capex was $2.7bn, and FCF was $6.2bn (+9%). Cash generation remained robust.

b. FQ4: OCF reached a record $3.3bn, capex fell QoQ to $684mn, and FCF hit a record $2.6bn. Conversion improved QoQ.

II. Earnings call detail

2.1 Key management commentary

1. Results and market outlook: FY26 revenue grew over 21%, with profit growth nearly double that pace. WFE is expected to rise over 30% in 2027, and the company expects to outperform again.

a. Based on the FQ1 midpoint, CY26 Semi Systems revenue should grow over 40%. Advanced packaging revenue is set to increase about 90% in CY26, with inspection and metrology up over 50%.

b. Share in advanced foundry/logic and DRAM is rising meaningfully. In FQ4, DRAM, advanced packaging revenue and sales in Korea and Taiwan all reached records.

c. In 2027, cloud capex is expected to grow over 50% and exceed $1tn. This underpins a multi-year upcycle.

2. Supply/demand and cleanrooms: Demand for leading-edge chips far exceeds supply. Over the medium term, cleanroom availability is the bottleneck for tool absorption.

a. Advanced logic and DRAM fabs are running full, with NAND following close behind. ICAPS has returned to a healthy range.

b. For 2027, more than 20 tracked fab ramps and line expansions are underway. It is the third straight quarter with 10+ new large projects added, many starting production only in 2029–2030, signaling 5–10 year demand above prior plans.

c. The largest customer provides rolling eight-quarter forecasts and places orders early. Visibility has improved.

3. Supply chain and internal capacity: Forecasts to suppliers are raised every quarter. Capacity is being positioned for higher shipments beyond 2028.

a. The CEO recently met with 250+ senior executives from core suppliers to align on ramp plans. Coordination is ongoing.

b. Capacity targets: Double system output capability by 2028 vs. FQ4'26. Manufacturing and lab capacity will more than double by 2030.

4. AI structural opportunity and portfolio: About 60% of an AI data center's capex is silicon, with over 85% in advanced foundry/logic, DRAM, and advanced packaging. This is where spend is concentrated.

a. These three are the fastest-growing parts of WFE into 2027, together contributing about 75% of WFE growth through 2030. The mix is highly favorable.

b. The company addresses roughly 55% of WFE and leads in CVD, PVD, EPI, CMP, ion implant, thermal, e-beam, and conductor etch. Breadth is a differentiator.

c. Over 37,000 chambers are connected to AIX, growing over 20% YoY. New EPIC partners include Intel, Kioxia, BESI, and UCLA, bringing the total to 15.

5. Long-term targets and internal AI: 2025–2030 targets were reaffirmed, with meaningful progress expected in 2027. Execution remains on track.

a. Targets: Raise WFE share by over 200bps, lift service revenue per installed tool by 20%+, and expand GPM and OPM by 500bps and 1,000bps, respectively. Mix and pricing should help.

b. Internal AI: Over 80% of employees use AI tools, with average software development productivity gains over 40%. Monthly token usage has increased more than 50x this year.

2.2 Q&A

Q: How has demand changed over the past three months by end-market, and what shipment growth corresponds to the plan to double system output and capacity?

A: Demand keeps strengthening, with 10+ new fab projects added for a third straight quarter. New projects include greenfield fabs and brownfield upgrades. Advanced logic and DRAM supply is constrained, and customers are pulling forward projects and expanding as fast as possible.

On capacity, output capability will double by 2028, which you can gauge against the recent $8bn single-quarter Semi Systems run-rate. The company is not fully loaded today, and capacity will more than double by 2030 to support even higher output.

Capacity planning must cover a wide range of growth scenarios, and the ramp pace is still accelerating, with the same shared with suppliers. The CEO added that advanced packaging should grow about 90% in CY26 and remain strong in 2027 and beyond.

Q: How are you collaborating with suppliers and their upstreams? Are you providing prepayments or other financial support?

A: The focus is on sharing customers' eight-quarter forecasts so suppliers have incentive to invest on their own. With 2,000+ suppliers, the company passes down granular customer data for output planning and then follows up quarterly to align actual schedules.

We do not see structural barriers to meeting higher demand, though there will be many bottlenecks. Nearly all suppliers need to add capacity and headcount.

Q: What does the FQ1 end-market mix look like? Will DRAM surge again?

A: FQ1 mix is similar to FQ4, with DRAM and advanced logic still very strong. Both markets are supply-constrained, and customers are expanding as quickly as they can.

The 2027 full-year mix should be broadly similar, with advanced logic, DRAM, and advanced packaging growing the fastest. The change in 2027 is that ICAPS (mature nodes) resumes growth with heavier investment as prior capacity was absorbed and utilization normalized.

The CEO added that ICAPS growth should be much faster ex-China than in China. Regional dynamics will diverge.

Q: Have any customers recently asked to delay shipments by a month or two, or by a quarter or two?

A: No. All customers want tools as soon as possible. The CEO said in frequent visits over the past two months, customers consistently asked to accelerate ramps and bring forward deliveries.

Q: If data center build-outs slow, what would that mean for your WFE outlook?

A: We have not seen concerns about expanding too fast. Instead, customers want to accelerate. The team meets monthly with leading customers' CEOs, and all are asking for faster ramps. AI-driven demand in advanced foundry/logic, DRAM, and advanced packaging is significant, and capacity takes time to build.

The CFO added that demand in DRAM and advanced logic exceeds supply, which provides a buffer. PCs, smartphones, and smart TVs are also supply-constrained, so even if data center demand softens in coming years, there would be meaningful cushion, though that is not the base case.

Q: Early last year you expected Semi Systems to grow over 20% but it came in near 40%. What improved, and is the 30% WFE growth in 2027 a ceiling?

A: The ultimate limiter is cleanroom availability. Over the past year, customers boosted fab output by adding cleanrooms, pulling in projects, and upgrading lines. These are levers at the customer level, but the macro outcome still hinges on how much cleanroom space can be brought online.

The company did not directly answer whether 30% is a ceiling. It remains a function of cleanroom release.

Q: What is the actual WFE growth in 2026, and will your 2027 outperformance vs. WFE be similar to 2026?

A: We outperformed WFE in 2026 and expect to do so again in 2027. For CY26, company Semi Systems is up over 40%, with WFE growing slightly less. Outperformance stems from leadership in advanced logic, DRAM, and advanced packaging and the mix skew to these high-growth areas.

The magnitude of 2027 outperformance was not quantified. Directionally, it should persist.

Q: Some peers cited supply constraints impacting guidance. Are you affected, and would your FQ1 guide be higher without constraints?

A: There are minor bottlenecks, and FQ1 would be slightly higher if supply were perfect, but the impact is small. For the full year, output has grown double digits for three consecutive quarters, and we expect output to increase every quarter this fiscal year.

The CEO said customers want shipments as soon as possible, and there is still ramp work to do into 2027. Ramps remain steep.

Q: As DRAM moves toward 4F² and 3D DRAM, what is your positioning and opportunity?

A: As the industry moves to 4F² and 3D DRAM, our SAM expands and our share should rise by several points. We are already winning share on new 6F² versions, and as nodes advance from 6F² to 4F² to 3D DRAM, SAM per 100k wafer starts increases significantly.

Our DRAM business is much larger than the closest process-equipment competitor's, and we co-innovate deeply with each memory maker. Engagement is broad.

Q: How do you view AGS growth next year?

A: Long term, we view growth at about the mid-teens (~15%). The installed base expands 5%–10% per year, and revenue per tool grows 5%–10% per year, totaling roughly 15%.

This year benefited from industry-wide utilization rising to near 100%, which will not repeat as an extra tailwind. The company will continue to launch new offerings that help customers ramp and improve yield.

Q: Inventory days fell by 10 days. Why not build inventory more aggressively?

A: Inventory rose by just over $300mn this quarter to $6.9bn, and we would like to carry more. We are working with suppliers to that end. Output has grown double digits for three straight quarters, and the supply system is running at full tilt.

Q: What is the outlook for Semi Systems in the Apr. quarter?

A: No specific guide was provided. The company only reiterated that, with supply chain coordination, output should increase every quarter this fiscal year.

Q: DRAM WFE growth this year was driven largely by conversions. In 2027, will conversions slow and greenfield accelerate?

A: Both are happening, with customers more actively investing in greenfield alongside upgrades. The CEO said he has never seen customers focus this much on yield and output innovation in his career, as everyone wants more good die and more wafer output, which drives strong pull for AGS.

Over 37,000 chambers are connected to AIX, and innovations such as advanced matching and predictive maintenance models should accelerate services growth. Momentum is building.

Q: PDC grew over 50% this year. Will it again outgrow Semi Systems overall in 2027?

A: PDC will grow strongly again in 2027. The company did not specify outperformance vs. Systems, only noting that the overall company will also grow strongly in 2027.

Both e-beam and optical grew over 50% this year. E-beam is roughly 2x the scale of the closest competitor's, and when customers push architectural inflections, 'you cannot fix what you cannot see' — e-beam reveals structures to improve yield and creates unprecedented synergy with process-equipment innovation.

On the product pipeline, e-beam will introduce key products that accelerate customers' roadmaps. Optical has multiple major innovations, including in advanced packaging inspection.

Q: Can AGS incremental OPM stay in the low-30s to low-40s range? What is AGS assumed at in the 40% company OPM target by 2030?

A: No quantified margin assumptions were given for AGS. Management expects AGS gross and operating margins to continue to improve, with new offerings delivering high value in yield and output management and thus boosting margins.

AGS remains a key contributor to the company's overall margin targets. Mix and software should help.

Q: What is the cadence for GPM expansion over the next 4–6 quarters? Beyond mix, how much comes from operational improvement vs. pricing?

A: Expect full-year GPM to trend up, with cadence similar to FQ4 and FQ1. Positives include scaling output to absorb ramp costs, pricing from higher-value new products, and a faster-growing semi market.

Negatives include costs to hire and train for higher ramp levels. Management did not break out each contribution.

The CEO said the company leads in the fastest-growing areas of advanced foundry/logic, DRAM, and advanced packaging and is rolling out high-value new products, which is a tailwind for Systems GPM. Yield and output innovation in services is also very valuable, and margins should make meaningful progress in 2027 with value sharing as new devices scale.

Q: What is the FY27 outlook for China and its impact on margins?

A: China should grow but slower than AI-driven markets, and its mix may fall below 25% in 2027. Management did not address the impact of China on margins.

Q: If cleanrooms are the main constraint to shipments, how does availability look in 2028? Will WFE accelerate?

A: Cleanroom capacity expands each year, and WFE should grow with incremental cleanrooms. Customers add new projects every quarter, with 10+ added this quarter and many starting production in 2029–2030.

Roadmaps are extending further out, especially in later years, and the company is already working with customers on demand forecasts through 2030. At investor events, management noted that future WFE growth should exceed the past decade's pace, driven mainly by incremental AI demand.

Q: What is the progress and timeline for hybrid bonding, and how does inference demand affect adoption?

A: Hybrid bonding is in volume for logic, and memory customers are evaluating it for HBM. It is currently used in some 3D packaging schemes for leading-edge logic; memory adoption timing is for customers to address, and management did not separately comment on inference demand.

Hybrid bonding is critical to boost I/O density, shorten wiring, and improve power and performance. It is a key technology for 3D and advanced packaging, and the company continues to invest.

The company covers about 80% of the process steps for hybrid bonding, and has high share in HBM stacking, all of which drive strong packaging growth in 2026. Adoption should deepen in both logic and memory, and with the BESI partnership and adjacent-step strengths, packaging growth should accelerate.

Q: If ICAPS is strengthening ex-China while China also grows, why won't your outperformance vs. WFE widen in 2027?

A: Both overseas and China investments will grow, and the company's SAM share in China is rising. Management did not directly answer whether outperformance will widen.

Global digestion from heavy China-led additions in recent years is nearing completion, and some overseas customers are considering expansions and larger investments. China will also grow, and the company's share in the serviceable China market increased in 2026, driven mainly by 28nm-class investments, and it will continue to serve that market.

Q: With the advanced packaging outlook raised again, how do HBM and foundry/logic split in 2026, and what about 2027?

A: In 2026, a large portion of advanced packaging comes from HBM, and HBM remains strong in 2027. The outlook has been raised each quarter, driven by continuous additions of projects and capacity needs across the year.

The CEO said customers are focusing on new packaging architectures and pushing package sizes as large as possible. Multi-die interconnects are critical for AI performance, and over the past few years the company has built a leading packaging portfolio for these inflections.

With new products and the NEX acquisition, this provides a tailwind for 2027 and beyond. Momentum should persist.

Q: What is the 1H vs. 2H cadence in 2027?

A: We expect output to increase every quarter, and there are no unknowns on the cleanroom side. No 1H/2H split was provided.

Q: How should we model the trajectory and margins for Other?

A: Model about $400mn of revenue per quarter, with Other roughly breakeven in aggregate. Other aggregates non-reportable operating segments, the largest being Display, which delivered over $500mn of revenue in FQ4.

Display runs at roughly 40% GPM and 20%+ OPM. For FQ1 and subsequent quarters, model around $400mn; changes will be communicated, and Display profits fund adjacent growth initiatives.

<End of text>

Risk Disclosure and Statement:Dolphin Research Disclaimer and General Disclosure

Login to unlock17,379characters for free

This content is only available to signed-in users. Sign in to your Longbridge account to read the full post.